Visbella Silver Alloy Wheel Rim Repair Kit Car Kerb Damage Scuffs Scrape Fix DIY

Description

Visbella Silver Alloy Wheel Rim Repair Kit Car Kerb Damage Scuffs Scrape Fix DIY
Feature:
1.Permanent repair
2.Easy maintenance
3.Heat to 130 ° C
4.Resistant to washing
Specification:
1.Easy resistant to 130C.
2.Added value-vibration,carwash resistant.
3.Repair kit contains complete accessories, allows you to repair damage and scratch in 30 minutes
4.Alloy wheel repair kit works on the curb damage,scratches,slight dents, installation damages, sanding marks and other damage to wheel
5.Package Dimensions: 8.3 x 4.3 x 2 inches
Instruction:
1.Preparation: clean the damaged alloy wheel with Alcohol prep pad and remove rough edges and unevenest around the damaged area.
2.Confirm the repair area. If it is slightly damaged, use wet sandpaper to accommodate the outlines to repaired surface, and lacquer repair
area with alloy silver.
3.If the damage area is large or with dents. Then use the repair adhesive: press out the needed repair adhesive to a mat. Mix 2 components
to a consistent grey mass with spatula provided. (Finish the mixing within2-4mins)
4.Repair: Fill with the mixed adhesive to overflow the damaged area.Allow it dry for 15mins.
5.Accommodate the outlines: use wet sandpaper to accommodate theoutlines to repaired surface. If necessary, please repeat step 3 & 4.
6.Lacquering: clean the repair area and apply a thin layer of lacquer by brush. Skin time of lacquer should be at least 12 hours before using
thecar, and full cure will takes 3 days.
Package Included:
1 X Repair Adhesive
1 X Silver Gray Paint (vibration-resistant)
2 X Gloves
1 X P1000 Sandpaper
1 X P400 Sandpaper
1 X Cleaning Cloth
2 X Alcohol Prep Pads
2 X Plastic Spatula